Transcend Tiki Torch.

• Groove edge: grooved both sides for hidden fasteners. No screw heads in the surface.
• Square edge: capped on all faces, for picture-frame borders, stair treads and any edge that shows.
• One length: 5480 mm. Cut on site to suit your layout.
• Covers about 0.79 m² per board with a 5 mm gap.
• Deep, multi-tonal grain in five colours.
• Manufacturer's 50-year limited residential warranty, including fade and stain.

Groove boards are held from the edge by hidden clips fixed to each joist. Start the first row with starter clips on a timber frame, or with colour-matched screws on a metal frame. Square edge boards are screwed through the face into each joist. Use the colour-matched screw for your frame, or recess the screw and cover it with a Pro Plug. Where a square edge board needs to take a hidden clip on one side, a groove can be cut into it with the groove cutter. Joists at 450 mm centres or closer. Leave 5 mm between boards side to side. Leave 3 to 5 mm where board ends meet: 3 mm when laying above 4.5 °C, 5 mm below it. Leave 6 to 13 mm where a board meets a wall, post or other solid object. Keep at least 38 mm of clear air beneath the boards. Trim 5 mm off both ends of every board before laying. These are the headline figures. Follow the manufacturer's current installation guide for your board and site, and confirm the layout with your installer.